Accessories

Welcome to our accessories page where we introduce you to the accessories available for the babybubl. This includes filters, textiles, Controller, and of course, the app. Enjoy! 

Filters

The bubl. HEPA filters are the heart of the babybubl. 

  • HEPA technology filters
  • Extraordinary efficient in trapping harmful particles, and even viruses.
  • Changed every 3-4 months depending on how polluted it is.
  • After use, discard in regular household waste.

HEPA technology filters are one of the most crucial parts in most air purifiers on the market today. That’s because it’s incredibly efficient in trapping particles of almost any size, from viruses measured in nanometers (that’s a million times smaller than millimeter), up to bigger particles like pollen.

HEPA filters have proven to be efficient in capturing, and reducing the amount of eg Covid-19 in the air which we’ve learned during this past couple of years.  

The bubl HEPA filters comes in a set of two which are recommended to be changed every 3-4 months, depending on how polluted the air is in your area. This is to guarantee the high efficiency of the filters, and to prevent accumulation of moist, or growth of eg mold on the filters. This is very common, especially when the filters are exposed to the elements as these ones are.  

bubl. Controller

The bubl. Controller is the unit that helps control your babybubl. It doesn’t only consist of the battery pack that drives the unit but also contains a lot of smart technology.     

  • Controls you babybubl device.
  • The "ON" button is for turning the unit on/off.
  • The "FAN" button will allow you to change between three different fan speeds.
  • Pressing the "FAN" button for 3 seconds will put the unit in Bluetooth pairing mode.
  • Remove the controller from the babybubl when charging, using the USB-C-port and accompanying charging cable.
  • Will fully charge in 2,5-4 hours and keep your babybubl running for up to 18 hours.

Through the buttons, you can adjust the fan speed, put the unit in Bluetooth pairing mode, and it will also communicate with you through the embedded multicolor LED lights. For example, telling you when it’s time to change filters,  or if there is any problem with the unit – you can read more about this in the troubleshooting segment under our FAQ. 

The battery that powers your babybubl is a typical 5000 mAh Li-ion battery which will keep it running for up to 18 hours, depending on which fan speed you use. With the highest fan speed, it will keep you running for approximately 9 hours.

The controller is charged with a standard USB-C input. The charging cable for this is of course included in the box. You use the USB-A port to connect it to the babybubl. Then place it in its pocket on the front of the babybubl.    

Partners & endorsements